|
|
|
National Stock Number:
5320-00-916-4990
Federal Supply Class:
5320
National Item Identification Number:
009164990
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| C580-6-10 | 81755 | LOCKHEED MARTIN CORPORATION | | GB510DP3-10 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | HL415-6-10 | 06725 | SPS TECHNOLOGIES, LLC | | HL415-6-10 | 17446 | HUCK INTERNATIONAL, INC | | HL415-6-10 | 27624 | SPS TECHNOLOGIES LLC | | HL415-6-10 | 56878 | SPS TECHNOLOGIES, LLC | | HL415-6-10 | 5M902 | HOWMET GLOBAL FASTENING SYSTEMS INC. | | HL415-6-10 | 60516 | WEST COAST AEROSPACE, INC. | | HL415-6-10 | 73197 | HI-SHEAR CORPORATION | | HL415-6-10 | 80539 | SPS TECHNOLOGIES, LLC | | HL415-6-10 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL415-6-10 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 0.940 INCHES MINIMUM AND 0.960 INCHES MAXIMUM | | GRIP LENGTH | 0.630 INCHES MAXIMUM | | HEAD STYLE | FLUSH COUNTERSUNK | | HEAD MAJOR DIAMETER | 0.2966 INCHES MINIMUM AND 0.3016 INCHES MAXIMUM | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP H11 OVERALL | | NOMINAL THREAD SIZE | 0.190 INCHES | | SHANK DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | SHEAR STRENGTH | 125000 SINGLE POUNDS PER SQUARE INCH | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8837,TY 2,CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) | | WIDTH BETWEEN FLATS | 0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM |
|
|