|
|
|
National Stock Number:
5320-00-464-8676
Federal Supply Class:
5320
National Item Identification Number:
004648676
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| 5320PL1562526 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | GB511G3-9 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | HL54-6-9 | 17446 | HUCK INTERNATIONAL, INC | | HL54-6-9 | 27624 | SPS TECHNOLOGIES LLC | | HL54-6-9 | 56878 | SPS TECHNOLOGIES, LLC | | HL54-6-9 | 73197 | HI-SHEAR CORPORATION | | HL54-6-9 | 80539 | SPS TECHNOLOGIES, LLC | | HL54-6-9 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL54-6-9 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 431 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SHEAR STRENGTH | 125000 SINGLE POUNDS PER SQUARE INCH | | HEAD HEIGHT | 0.045 INCHES MINIMUM AND | | 0.055 INCHES MAXIMUM | | HEAD MAJOR DIAMETER | 0.295 INCHES MINIMUM AND | | 0.315 INCHES MAXIMUM | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | FASTENER LENGTH | 0.877 INCHES MINIMUM AND | | 0.897 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.079 INCHES MINIMUM AND | | 0.081 INCHES MAXIMUM | | SHANK DIAMETER | 0.189 INCHES MINIMUM AND | | 0.190 INCHES MAXIMUM | | GRIP LENGTH | 0.567 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD SIZE | 0.190 INCHES | | THREAD CLASS | 3A | | THREAD QUANTITY PER INCH | 32 | | THREAD DIRECTION | RIGHT-HAND | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 73197 | | DESIGN CONTROL REFERENCE | HL54-6-9 |
|
|