|
|
|
National Stock Number:
5320-00-411-9439
Federal Supply Class:
5320
National Item Identification Number:
004119439
Description:
RIVET,BLIND
Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.
|
Manufacturer Information:
| 11450688-3 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 13220E5213-3 | 97403 | CECOM LR CENTER | | AF5171-3-3 | 53551 | ALLFAST FASTENING SYSTEMS, LLC | | BACR15DR3-3 | 77272 | THE BOEING COMPANY | | BACR15DR3-3 | 81205 | THE BOEING COMPANY | | 5320PL0739967 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | CCR264SS-3-3 | 11815 | SPS TECHNOLOGIES, LLC | | CCR264SS-3-03 | 11815 | SPS TECHNOLOGIES, LLC | | CCR264SS-3-3 | 1V757 | WESCO AIRCRAFT HARDWARE CORP. | | CCR264SS-3-03 | 6FN58 | R & M GOVERNMENT SERVICES INC | | CCR264SS-3-3 | F7652 | KLX AEROSPACE SOLUTIONS II SAS | | CCR264SS-3-3 | FB009 | KLX INC | | F0N2-6394C3-3 | H1822 | FOKKER AEROSTRUCTURES B.V. | | CCR264SS-3-3 | R1120 | SATAIR A/S | | GR501AC3-3 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | RV571A-3-3 | 53551 | ALLFAST FASTENING SYSTEMS, LLC | | FON2-6394-3-3 | H1822 | FOKKER AEROSTRUCTURES B.V. | | FON2-6394-3C3 | H1822 | FOKKER AEROSTRUCTURES B.V. | | FON2-6394C3-3 | H1822 | FOKKER AEROSTRUCTURES B.V. |
|
Techincal Specification:
| CRITICALITY CODE JUSTIFICATION | FEAT | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 100.0 DEGREES MAXIMUM | | EXPANSION DEVICE | SERRATED STEM-TYPE W | | FASTENER LENGTH | 0.265 INCHES NOMINAL | | GRIP LENGTH | 0.126 INCHES MINIMUM AND 0.187 INCHES MAXIMUM | | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) | | HEAD MAJOR DIAMETER | 0.183 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | SHANK DIAMETER | 0.094 INCHES NOMINAL | | SHANK STYLE | PULL THROUGH HOLLOW SHANK | | SPECIAL FEATURES | THIS PART MEETS THE Y REQUIREMENTS DUE TO CRITICAL FEATURES, TOLERANCES, FIT RESTRICTIONS, MATERIAL PROPERTIES AND MANUFACTURING PROCESS. FAILURE COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TO WEAPON SYSTEM, DEATH OR SERIOUS INJURY | | SURFACE TREATMENT | CADMIUM OVERALL |
|
|