|
|
|
National Stock Number:
5320-00-280-3503
Federal Supply Class:
5320
National Item Identification Number:
002803503
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| BACB30KF8-14 | 81205 | THE BOEING COMPANY | | GB510BD4-14 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | HL219-8-14 | 06725 | SPS TECHNOLOGIES, LLC | | HL219-8-14 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL219-8-14 | 17446 | HUCK INTERNATIONAL, INC | | HL219-8-14 | 50392 | SPS TECHNOLOGIES INC | | HL219-8-14 | 56878 | SPS TECHNOLOGIES, LLC | | HL219-8-14 | 60516 | WEST COAST AEROSPACE, INC. | | HL219-8-14 | 73197 | HI-SHEAR CORPORATION | | ST3M550A4-14 | 76301 | THE BOEING COMPANY | | HL219-8-14 | 80539 | SPS TECHNOLOGIES, LLC | | HL219-8-14 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL219-8-14 | 97928 | HUCK INTL INC | | HL219-8-14 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | FASTENER LENGTH | 1.260 INCHES MINIMUM AND 1.280 INCHES MAXIMUM | | GRIP LENGTH | 0.880 INCHES MAXIMUM | | HEAD STYLE | FLUSH COUNTERSUNK | | HEAD MAJOR DIAMETER | 0.421 INCHES MINIMUM AND 0.426 INCHES MAXIMUM | | LUBRICATION | CETYL ALCOHOL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-5626 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 4TH MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP E4340 OR STEEL COMP 4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OVERALL | | NOMINAL THREAD SIZE | 0.250 INCHES | | SHANK DIAMETER | 0.2797 INCHES MINIMUM AND 0.2807 INCHES MAXIMUM | | SHEAR STRENGTH | 95000 SINGLE POUNDS PER SQUARE INCH | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) | | WIDTH BETWEEN FLATS | 0.094 INCHES MINIMUM AND 0.096 INCHES MAXIMUM |
|
|