|
|
|
National Stock Number:
5320-00-246-0355
Federal Supply Class:
5320
National Item Identification Number:
002460355
Description:
PIN-RIVET
Detail:
A metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. A locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. The shank may include an external wrenching facility which breaks off at a predetermined applied torque.
|
Manufacturer Information:
| HL23-6-5 | 06516 | RELIANCE ELECTRIC INDUSTRIAL CO BEAR STATE SERVICE CENTER | | HL23-6-5 | 06725 | SPS TECHNOLOGIES, LLC | | HL23-6-5 | 17446 | HUCK INTERNATIONAL, INC | | HL23-6-5 | 56878 | SPS TECHNOLOGIES, LLC | | HL23-6-5 | 60516 | WEST COAST AEROSPACE, INC. | | HL23-6-5 | 73197 | HI-SHEAR CORPORATION | | HL23-6-5 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | HL23-6-5 | 97928 | HUCK INTL INC | | HL23-6-5 | R1120 | SATAIR A/S |
|
Techincal Specification:
| MATERIAL | ALUMINUM ALLOY 7075 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9 FED SPEC SINGLE MATERIAL RESPONSE OR | | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ANODIZE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAT TREATMENT | T-6 SOLUTION HEAT TREATED OVERALL | | HEAD STYLE | FLUSH COUNTERSUNK | | HEAD MAJOR DIAMETER | 0.349 INCHES MINIMUM AND | | 0.354 INCHES MAXIMUM | | COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL | | SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED | | FASTENER LENGTH | 0.627 INCHES MINIMUM AND | | 0.647 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.079 INCHES MINIMUM AND | | 0.081 INCHES MAXIMUM | | SHANK DIAMETER | 0.189 INCHES MINIMUM AND | | 0.190 INCHES MAXIMUM | | GRIP LENGTH | 0.317 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD SIZE | 0.190 INCHES | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 73197 | | DESIGN CONTROL REFERENCE | HL23-6-5 |
|
|