|
|
|
National Stock Number:
5320-00-135-1125
Federal Supply Class:
5320
National Item Identification Number:
001351125
Description:
RIVET,BLIND
Detail:
An item consisting of two or more of the following components: stem, rivet body, sleeve, expander, bolt, and collar. It is a headed fastening device with the shank designed to be expanded by means of a separate or integral stem or mandrel, or bolt and expander. It is designed to be installed or expanded from one side only. Excludes NUT, BLIND ASSEMBLY.
|
Manufacturer Information:
| 11450688-2 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 13220E5213-2 | 97403 | CECOM LR CENTER | | BACR15DR3-2 | 11815 | SPS TECHNOLOGIES, LLC | | BACR15DR3-2 | 53551 | ALLFAST FASTENING SYSTEMS, LLC | | AF5171-3-2 | 53551 | ALLFAST FASTENING SYSTEMS, LLC | | 5320PL1507223 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | CCR264SS-3-02 | 11815 | SPS TECHNOLOGIES, LLC | | CCR264SS-3-2 | 11815 | SPS TECHNOLOGIES, LLC | | CCR26455-3-02 | 53551 | ALLFAST FASTENING SYSTEMS, LLC | | BACR15DR3-2 | 77272 | THE BOEING COMPANY | | BACR15DR3-2 | 81205 | THE BOEING COMPANY | | CCR264SS-3-02 | A0126 | LEONARDO SPA HELICOPTERS DIVISION -PRODUCTION SITE | | CCR264SS-3-2 | F7652 | KLX AEROSPACE SOLUTIONS II SAS | | CCR264SS-3-2 | FB009 | KLX INC | | RV571A-3-2 | 11815 | SPS TECHNOLOGIES, LLC | | GR501AC3-2 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | RV571A-3-2 | 53551 | ALLFAST FASTENING SYSTEMS, LLC | | RV571A3-2 | 53551 | ALLFAST FASTENING SYSTEMS, LLC | | RV571A-3-2 | 98996 | OLYMPIC FASTENING SYSTEMS INC | | CCR264SS3-2 | F6137 | SAFRAN LANDING SYSTEMS | | F0N2-6394C3-2 | H1822 | FOKKER AEROSTRUCTURES B.V. | | FON2-6394-3-2 | H1822 | FOKKER AEROSTRUCTURES B.V. | | FON2-6394-3C2 | H1822 | FOKKER AEROSTRUCTURES B.V. | | FON2-6394C3-2 | H1822 | FOKKER AEROSTRUCTURES B.V. | | CCR264SS-3-2 | R1120 | SATAIR A/S |
|
Techincal Specification:
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM | | EXPANSION DEVICE | SERRATED STEM-TYPE W | | FASTENER LENGTH | 0.203 INCHES NOMINAL | | GRIP LENGTH | 0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | HEAD MAJOR DIAMETER | 0.183 INCHES NOMINAL | | HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) | | MATERIAL | STEEL OVERALL | | PROPRIETARY CHARACTERISTICS | PACS | | SHANK DIAMETER | 0.094 INCHES NOMINAL | | SHANK STYLE | PULL THROUGH HOLLOW SHANK | | SURFACE TREATMENT | ANY ACCEPTABLE OVERALL |
|
|