|
|
|
National Stock Number:
5315-12-124-0134
Federal Supply Class:
5315
National Item Identification Number:
121240134
Description:
PIN,COTTER
Detail:
A half round, cylindrical, or flat piece of metal, bent to form a straight or crimped two-pronged device with an eye at one end, for inserting in a hole drilled at right angle to the axis of the stud, shaft, or like item. Its ends are separable or one end is bent to hold it in place.
|
Manufacturer Information:
| 000094003001 | D8046 | DAIMLER AG | | 000094003001 | D8266 | MTU FRIEDRICHSHAFEN GMBH | | 10313170 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 000094003210 | D8046 | DAIMLER AG | | 3,2X18DIN94-ST | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | 3-2X18DIN94ST | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | 3X18DIN94ST | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | DIN94-3,2X18-ST | D8286 | DIN DEUTSCHES INSTITUT FUER NORMUNGEV | | NO PRIMARY REF 12-124-0134 | IREF0 | THIS NCAGE IS USED TO INFORM THAT THE DESIGN CONTROL AUTHORITY CANNOT BEESTABLISHED OR THE ITEM OF SUPPLY IS NO LONGER M |
|
Techincal Specification:
| DIAMETER | 3.2 MILLIMETERS NOMINAL | | MATERIAL | STEEL OVERALL | | POINT TYPE | EXTENDED PRONG SQUARE CUT OR EXTENDED PRONG CHISEL | | STYLE DESIGNATOR | STANDARD | | TEST DATA DOCUMENT | D8286-DIN94/SE+83/ STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). | | UNDERLOOP LENGTH | 18.0 MILLIMETERS NOMINAL |
|
|