| CENTER TO CENTER DISTANCE BETWEEN HOLES | 117.0 MILLIMETERS NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 28.0 MILLIMETERS NOMINAL |
| FIRST END COUNTERBORE DEPTH | 10.0 MILLIMETERS NOMINAL |
| FIRST END COUNTERBORE DIAMETER | 20.0 MILLIMETERS NOMINAL |
| FIRST END STYLE | CHAMFERED AND COUNTERBORED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST HOLE DIAMETER | 11.0 MILLIMETERS NOMINAL |
| FIRST END TAPER LENGTH | 2.0 MILLIMETERS NOMINAL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | JCB 5001/1100 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | PIVOT PIN-50X290 |
| PIN OVERALL DIAMETER | 49.94 MILLIMETERS MINIMUM AND 49.97 MILLIMETERS MAXIMUM |
| PIN OVERALL LENGTH | 290.0 MILLIMETERS NOMINAL |
| SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END TAPER LENGTH | 2.0 MILLIMETERS NOMINAL |
| SECOND HOLE DIAMETER | 3.0 MILLIMETERS NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | CHAMFERED |
| SPECIAL FEATURES | SECOND HOLE DRILLED HALFWAY THRU AND MEETS WITH A CENTERLINE HOLE THAT IS DRILLED FROM SECOND END 151.9MM FROM END AND IS 8.4MM IN DIAMETER |