| FIRST END LOCATION | UNTHREADED END |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.03 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST STEP DIAMETER | 0.622 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | FN29,SST 300 SERIES,15-5 OR 17-4 PH MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL CORROSION RESISTING OVERALL |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | INDEX ROD |
| PROPRIETARY CHARACTERISTICS | PACS |
| NOMINAL THREAD SIZE | 0.500 INCHES |
| OVERALL LENGTH | 3.83 INCHES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SECOND STEP DIAMETER | 0.500 INCHES NOMINAL |
| SECOND STEP LENGTH | 0.500 INCHES NOMINAL |
| SHOULDER DIAMETER | 0.410 INCHES NOMINAL |
| SHOULDER LENGTH | 1.80 INCHES NOMINAL |
| SPECIAL FEATURES | PIN HAS THREE THREADED PORTIONS TOTAL;FIRST END IS UNTHREADED,FIRST STEP AND SECOND STEP ARE 1/2-13 UNC-2A AND THE TIP,OR SECOND END,IS 5/16-18 UNC-2A |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM A967 AND ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| THIRD STEP DIAMETER | 0.3125 INCHES NOMINAL |
| THIRD STEP LENGTH | 0.380 INCHES NOMINAL |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.500 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 13 |
| THREAD SERIES DESIGNATOR | UNC |