| CENTER TO CENTER DISTANCE BETWEEN HOLES | 60.0 MILLIMETERS NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 15.0 MILLIMETERS NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST HOLE DIAMETER | 3.0 MILLIMETERS NOMINAL |
| FIRST END TAPER LENGTH | 0.5 MILLIMETERS NOMINAL |
| FIRST END TIP RADIUS | 7.9 MILLIMETERS MINIMUM AND 8.1 MILLIMETERS MAXIMUM |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HINGE PIN |
| PIN OVERALL LENGTH | 120.0 MILLIMETERS NOMINAL |
| PIN OVERALL DIAMETER | 7.9 MILLIMETERS MINIMUM AND 8.1 MILLIMETERS MAXIMUM |
| SECOND END TIP RADIUS | 7.9 MILLIMETERS MINIMUM AND 8.1 MILLIMETERS MAXIMUM |
| SECOND HOLE DIAMETER | 3.0 MILLIMETERS NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | SQUARE W/THRU HOLE |