| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.600 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 6.350 INCHES NOMINAL |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST HOLE DIAMETER | 0.161 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6348 ASSN STD SINGLE MATERIAL RESPONSE AND AMS 6370 ASSN STD SINGLE MATERIAL RESPONSE AND AMS 6349 ASSN STD SINGLE MATERIAL RESPONSE AND AMS 6382 ASSN STD SINGLE MATERIAL RESPONSE AND AMS 6409 ASSN STD SINGLE MATERIAL RESPONSE AND AMS 6411 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4130 AND STEEL COMP 4140 AND STEEL COMP 4340 OVERALL |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT |
| PIN OVERALL DIAMETER | 0.995 INCHES MINIMUM AND 0.999 INCHES MAXIMUM |
| PIN OVERALL LENGTH | 7.550 INCHES NOMINAL |
| PROPRIETARY CHARACTERISTICS | PACS |
| SECOND HOLE DIAMETER | 0.161 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| SPECIAL FEATURES | HEAT TREAT TO 160-180 KSI |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS2485 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | OXIDE OVERALL |