| DIAMETER | 1.499 INCHES MINIMUM AND 1.500 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.910 INCHES NOMINAL |
| FIRST END COUNTERSINK DIAMETER | 0.430 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED AND COUNTERSUNK |
| FIRST HOLE DIAMETER | 0.188 INCHES NOMINAL |
| HARDNESS RATING | 60.0 ROCKWELL C MINIMUM OVERALL |
| HEAD STYLE | FLAT |
| HEIGHT | 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | DRILLED THRU CENTER |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A534 ASSN STD SINGLE MATERIAL RESPONSE OR SAE8620 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 8620 OVERALL |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | SPINDLE, PINION OUTPUT PLANETARY |
| PIN HEAD DIAMETER | 1.555 INCHES MINIMUM AND 1.565 INCHES MAXIMUM |
| PROPRIETARY CHARACTERISTICS | PACS |
| SPECIAL FEATURES | DRILLED HOLE ON SHANK DEPTH 0.50-0.60; HEAD DRILLED HOLE 0.750 DIAMETER AND 2.00-2.10 DEPTH;COUNTERSINK FIRST END TO 0.495 IF BELL TYPE IS USED |
| STYLE DESIGNATOR | GROOVE |
| UNDERCUT DIAMETER | 1.459 INCHES MINIMUM AND 1.460 INCHES MAXIMUM |
| UNDERCUT RADIUS | 0.02 INCHES MAXIMUM |
| UNDER HEAD LENGTH | 3.345 INCHES MINIMUM AND 3.355 INCHES MAXIMUM |