|
|
|
National Stock Number:
5315-01-657-2582
Federal Supply Class:
5315
National Item Identification Number:
016572582
Description:
PIN,GROOVED,HEADED
|
Manufacturer Information:
| 3392AS2214 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| DIAMETER | 2.242 INCHES MINIMUM AND 2.248 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.447 INCHES NOMINAL | | EFFECTIVE LENGTH | 3.405 INCHES NOMINAL | | CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.06 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.388 INCHES NOMINAL | | HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL | | HEAD STYLE | FLAT CHAMFER | | HEIGHT | 0.18 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL | STEEL COMP 4130 OVERALL | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN,GUN MOUNT PIVOT | | PIN HEAD DIAMETER | 4.00 INCHES NOMINAL | | PROPRIETARY CHARACTERISTICS | PACS | | SPECIAL FEATURES | 4130 ALLOY STEEL (UNS G41300) QUENCHED AND TEMPER 33-38 HRC SFTTDMANGANESE PHOSPHATE BASE PER MIL-DTL-16232,TYPE M, CLASS 3. APPLY SOLID FILM LUBRIC ANT IN ACCORDANCE WITHMIL-L-46010 TO ALL SURFACES UNLESS OTHERWISE SPECIFIED | | STYLE DESIGNATOR | GROOVE | | SURFACE TREATMENT | PHOSPHATE MANGANESE AND LUBRICANT OVERALL | | UNDERCUT DIAMETER | 1.78 INCHES NOMINAL | | UNDER HEAD LENGTH | 4.597 INCHES NOMINAL | | UNDERCUT WIDTH | 0.450 INCHES NOMINAL |
|
|