| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.432 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.79 INCHES NOMINAL |
| FIRST END LOCATION | CHAMFERED END |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.08 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST HOLE DIAMETER | 0.250 INCHES MINIMUM AND 0.255 INCHES MAXIMUM |
| HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL | STEEL COMP 4340 OVERALL |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN,SHOULDER,LATCH |
| PROPRIETARY CHARACTERISTICS | PACS |
| OVERALL LENGTH | 6.620 INCHES NOMINAL |
| SPECIAL FEATURES | ABPFJCRITICAL DIMENSION - 100% ACCEPTANCE INSPECTION REQUIRED |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND HOLE DIAMETER | 0.185 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| SECOND UNDERCUT DIAMETER | 0.490 INCHES MINIMUM AND 0.495 INCHES MAXIMUM |
| SHANK LENGTH | 5.510 INCHES NOMINAL |
| SHANK DIAMETER | 0.562 INCHES MINIMUM AND 0.563 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.902 INCHES MINIMUM AND 0.904 INCHES MAXIMUM |
| STYLE DESIGNATOR | UNDERCUT |
| SURFACE TREATMENT | PHOSPHATE MANGANESE OVERALL |
| UNDERCUT DIAMETER | 0.44 INCHES NOMINAL |