| FIRST END LOCATION | UNTHREADED END |
| FIRST END TAPER ANGLE | 0.060 RADIANS NOMINAL |
| FIRST END TAPER LENGTH | 0.22 INCHES NOMINAL |
| FIRST END TIP RADIUS | 0.060 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS-S-7720,CONDITION B NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 302 OVERALL |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN,ALLIGNMENT,CRES |
| PIN GRIP LENGTH | 0.410 INCHES NOMINAL |
| PIN OVERALL DIAMETER | 0.2500 INCHES NOMINAL |
| PIN OVERALL LENGTH | 1.00 INCHES NOMINAL |
| PROPRIETARY CHARACTERISTICS | PACS |
| NOMINAL THREAD SIZE | 0.2500 INCHES |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND END TAPER LENGTH | 0.05 INCHES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SPECIAL FEATURES | PIN HAS HEXAGON SHAPED CENTER SECTION FOR WRENCHING ACTION;WIDTH ACROSS FLATS ON HEXAGON IS 0.500" AND IS 0.10" IN THICKNESS |
| SPECIFICATION/STANDARD DATA | 98897-LS35496 MANUFACTURERS STANDARD |
| SURFACE FINISH | 125.0 MICROINCHES ALL OTHER SURFACES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS-QQ-P-416,TY II,CL 2 NATIONAL STD/SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.490 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 28 |
| THREAD SERIES DESIGNATOR | UNF |