| DIAMETER | 0.125 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.091 INCHES NOMINAL |
| CHAMFER LENGTH | 0.030 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.070 INCHES NOMINAL |
| HARDNESS RATING | 26.5 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) |
| HEIGHT | 0.030 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6300 ASSN STD SINGLE MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OR STEEL COMP 8740 OVERALL |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, STRAIGHT, HEADED, DRILLED SHANK |
| PIN HEAD DIAMETER | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL |
| PROPRIETARY CHARACTERISTICS | PACS |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | ITEM IS FAA CERTIFIED |
| SHEAR STRENGTH | 75000 SINGLE POUNDS PER SQUARE INCH |
| SPECIAL FEATURES | O'LEVEL ATA-56 |
| STYLE DESIGNATOR | STRAIGHT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE II, CLASS 2 FED STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| UNDER HEAD LENGTH | 1.220 INCHES NOMINAL |