| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.132 INCHES MINIMUM AND 0.258 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 8.505 INCHES MINIMUM AND 8.630 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.063 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED |
| FIRST HOLE DIAMETER | 0.203 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| MATERIAL | STEEL CORROSION RESISTING OVERALL |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN BALL LOCK |
| PIN OVERALL DIAMETER | 0.500 INCHES NOMINAL |
| PIN OVERALL LENGTH | 9.015 INCHES MINIMUM AND 9.365 INCHES MAXIMUM |
| PROPRIETARY CHARACTERISTICS | PACS |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER ANGLE | 18.0 DEGREES NOMINAL |
| SECOND END TAPER LENGTH | 0.375 INCHES NOMINAL |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND HOLE DIAMETER | 0.203 INCHES NOMINAL |