| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 9.65 MILLIMETERS NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 106.65 MILLIMETERS NOMINAL |
| FIRST END TAPER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| FIRST END TAPER LENGTH | 0.1 MILLIMETERS MINIMUM AND 1.5 MILLIMETERS MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST HOLE DIAMETER | 4.0 MILLIMETERS MINIMUM AND 4.4 MILLIMETERS MAXIMUM |
| HOLE ARRANGEMENT STYLE | BOTH ENDS DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B211/B211M ASSN STD SINGLE MATERIAL RESPONSE OR ASTM B221/B221M ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 6061 OVERALL |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN |
| PIN OVERALL DIAMETER | 9.52 MILLIMETERS NOMINAL |
| PIN OVERALL LENGTH | 122.7 MILLIMETERS MINIMUM AND 124.1 MILLIMETERS MAXIMUM |
| PROPRIETARY CHARACTERISTICS | PACS |
| SECOND END STYLE | CHAMFERED |
| SECOND END TAPER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| SECOND END TAPER LENGTH | 1.8 MILLIMETERS MINIMUM AND 3.2 MILLIMETERS MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND HOLE DIAMETER | 6.7 MILLIMETERS MINIMUM AND 7.1 MILLIMETERS MAXIMUM |
| SPECIAL FEATURES | MATERIAL IS HEAT TREATED TO -T6, -T651, OR -T6511. PAINT PER REQUIREMENTS ON DRAWING 19207-12344344, COLOR NUMBER 34094 GREEN OF FED-STD-595. HOLES ARE TO BE FREE OF PAINT. |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-DTL-5541 TYPE 2, CLASS 1A MIL SPEC 1ST TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CHROMATE AND PAINT OVERALL |