| FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST END TAPER LENGTH | 0.7 MILLIMETERS MINIMUM AND 0.8 MILLIMETERS MAXIMUM |
| FIRST END STYLE | CHAMFERED |
| FIRST STEP DIAMETER | 7.8 MILLIMETERS MINIMUM AND 8.0 MILLIMETERS MAXIMUM |
| FIRST STEP LENGTH | 19.8 MILLIMETERS MINIMUM AND 20.2 MILLIMETERS MAXIMUM |
| HARDNESS RATING | 28.0 ROCKWELL C MINIMUM OVERALL |
| HEAD STYLE | ROUND W/WRENCH FLATS |
| HEIGHT | 3.6 MILLIMETERS MINIMUM AND 4.4 MILLIMETERS MAXIMUM |
| MATERIAL | STEEL CORROSION RESISTING OVERALL |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, LEFT REAR SLAT |
| PIN HEAD DIAMETER | 19.5 MILLIMETERS MINIMUM AND 20.5 MILLIMETERS MAXIMUM |
| PROPRIETARY CHARACTERISTICS | PACS |
| SECOND STEP DIAMETER | 6.0 MILLIMETERS NOMINAL |
| SECOND STEP LENGTH | 11.6 MILLIMETERS MINIMUM AND 12.4 MILLIMETERS MAXIMUM |
| SHEAR STRENGTH | 940 SINGLE MEGAPASCALS |
| WIDTH ACROSS FLATS | 12.7 MILLIMETERS MINIMUM AND 13.0 MILLIMETERS MAXIMUM |
| STYLE DESIGNATOR | SHOULDER |
| SURFACE TREATMENT | OXIDE OVERALL |
| UNDER HEAD LENGTH | 36.0 MILLIMETERS NOMINAL |