|
|
|
National Stock Number:
5315-01-627-0273
Federal Supply Class:
5315
National Item Identification Number:
016270273
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 3M943C4B5-14 | 06725 | SPS TECHNOLOGIES, LLC | | 3M943C4B5-14 | 56878 | SPS TECHNOLOGIES, LLC | | 3M943C4B5-14 | 73197 | HI-SHEAR CORPORATION | | 3M943C4B5-14 | 76301 | THE BOEING COMPANY | | 3M943C4B5-14 | 80539 | SPS TECHNOLOGIES, LLC |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.030 INCHES NOMINAL | | FIRST END LOCATION | THREADED END | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, INDEX | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED STD SINGLE MATERIAL RESPONSE OR MMS 265 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 302 OR STEEL COMP 303SE OR STEEL COMP 304 OVERALL | | NOMINAL THREAD SIZE | 0.2500 INCHES | | OVERALL LENGTH | 1.837 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER LENGTH | 0.120 INCHES NOMINAL | | SECOND END TIP RADIUS | 0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM | | SECOND SHANK DIAMETER | 0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM | | SECOND SHANK LENGTH | 0.995 INCHES NOMINAL | | SHANK DIAMETER | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM | | SHANK LENGTH | 0.717 INCHES NOMINAL | | SHOULDER WIDTH ACROSS FLATS | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM | | STYLE DESIGNATOR | SHOULDER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.405 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 28 | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
|
|