| FIRST END STYLE | CHAMFERED W/THRU HOLE |
| FIRST END TAPER ANGLE | 4.0 DEGREES MINIMUM AND 16.0 DEGREES MAXIMUM |
| FIRST END TAPER LENGTH | 23.81 MILLIMETERS NOMINAL |
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 OR ASTM A483 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 416 OR STEEL COMP 410 OVERALL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN,LATCH |
| PIN OVERALL DIAMETER | 9.52 MILLIMETERS NOMINAL |
| PIN OVERALL LENGTH | 31.75 MILLIMETERS NOMINAL |
| SECOND END CORNER RADIUS | 1.19 MILLIMETERS MINIMUM AND 3.17 MILLIMETERS MAXIMUM |
| SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL |
| SECOND END STYLE | RADIUS |
| SHEAR STRENGTH | 16000 DOUBLE POUNDS PER SQUARE INCH |
| SPECIAL FEATURES | ITEM HAS ONE 1.6 MM DIA HOLE DRILLED THROUGH THE ENTIRE LGT,ANOTHER 1.6 MM DIA HOLE DRILLED 19.05 MM FROM CHAMFERED END,A SECOND HOLE DRILLED 27.77 MM FROM CHAMFERED END IS 3.15/3.27 MM DIA; ITEM IS MADE FROM MS16555-660 SPECIFICATION |
| SURFACE FINISH | 125.0 MICROINCHES ALL OTHER SURFACES |
| SURFACE FINISH | 16.0 MICROINCHES CHAMFERED END |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM A380 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |