| DIAMETER | 0.499 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.200 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| CHAMFER LENGTH | 0.100 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.126 INCHES MINIMUM AND 0.131 INCHES MAXIMUM |
| HEAD STYLE | FLAT |
| HEIGHT | 0.395 INCHES MINIMUM AND 0.405 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A681, TOOL STEEL H13, ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | AFT, PIN |
| PIN HEAD DIAMETER | 0.650 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| PIN CHAMFER ANGLE | 44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM |
| PROPRIETARY CHARACTERISTICS | PACS |
| SPECIAL FEATURES | SECOND HOLE DRILLED THROUGH HEAD, 0.186-0.191 MIN-MAX INCH DIAMETER |
| STYLE DESIGNATOR | STRAIGHT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416, TYPE II, FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| UNDER HEAD LENGTH | 8.305 INCHES MINIMUM AND 8.395 INCHES MAXIMUM |