| MATERIAL | STEEL COMP XM-13 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SHEAR STRENGTH | 30000 DOUBLE POUNDS PER SQUARE INCH |
| STYLE DESIGNATOR | SHOULDER |
| UNDER HEAD LENGTH | 1.2675 INCHES MINIMUM AND |
| 1.2875 INCHES MAXIMUM |
| FIRST STEP DIAMETER | 0.3896 INCHES MINIMUM AND |
| 0.3901 INCHES MAXIMUM |
| FIRST STEP LENGTH | 0.6825 INCHES MINIMUM AND |
| 0.6925 INCHES MAXIMUM |
| SECOND STEP DIAMETER | 0.3640 INCHES MINIMUM AND |
| 0.3680 INCHES MAXIMUM |
| SECOND STEP LENGTH | 0.590 INCHES NOMINAL |
| FIRST END STYLE | CHAMFERED AND COUNTERSUNK |
| FIRST END TAPER LENGTH | 0.030 INCHES MAXIMUM |
| FIRST END COUNTERSINK DIAMETER | 0.197 INCHES MINIMUM AND |
| 0.217 INCHES MAXIMUM |
| FIRST END TAPER ANGLE | 0.215 DEGREES MINIMUM AND |
| 0.235 DEGREES MAXIMUM |
| FIRST END COUNTERSINK ANGLE | 90.0 DEGREES MINIMUM AND |
| 100.0 DEGREES MAXIMUM |
| HEAD STYLE | FLAT CHAMFER |
| PIN HEAD DIAMETER | 0.565 INCHES MINIMUM AND |
| 0.600 INCHES MAXIMUM |
| HEIGHT | 0.130 INCHES MINIMUM AND |
| 0.140 INCHES MAXIMUM |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN-RIVET, THREADED, TENSION |