|
|
|
National Stock Number:
5315-01-604-2840
Federal Supply Class:
5315
National Item Identification Number:
016042840
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| MS9847-25 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CHAMFER LENGTH | 0.030 INCHES NOMINAL | | DIAMETER | 0.3744 INCHES MINIMUM AND 0.3749 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.087 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.094 INCHES MINIMUM AND 0.101 INCHES MAXIMUM | | HARDNESS RATING | 45.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | HEIGHT | 0.035 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MS 5616 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 615 OVERALL | | PIN CHAMFER ANGLE | 20.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.500 INCHES NOMINAL | | STYLE DESIGNATOR | STRAIGHT | | UNDER HEAD LENGTH | 1.599 INCHES MINIMUM AND 1.609 INCHES MAXIMUM |
|
|