|
|
|
National Stock Number:
5315-01-600-2608
Federal Supply Class:
5315
National Item Identification Number:
016002608
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A HEADLESS, CYLINDRICALLY-SHAPED ITEM HAVING A STRAIGHT, SMOOTH, SOLID BODY, WITH OR WITHOUT A DRILLED HOLE(S). IT HAS AN OUTSIDE DIAMETER EQUAL TO OR LESS THAN ITS LENGTH. ITS LENGTH MUST NOT EXCEED TWELVE INCHES (304 MM); FOR ITEMS WHOSE LENGTH EXCEEDS TWELVE INCHES (304 MM); SEE ROD, STRAIGHT, HEADLESS. IT IS USED FOR ALIGNING OR TRANSFER OF TORQUE AND/OR THRUST, BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. SEE ALSO PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.28 INCHES NOMINAL | | ANGLE BETWEEN CENTERLINE OF HOLES | 50.0 DEGREES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 1.72 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.06 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.19 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH ENDS DRILLED | | MATERIAL | STEEL OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT HANDLE, ISOLATOR | | PIN OVERALL DIAMETER | 0.375 INCHES NOMINAL | | PIN OVERALL LENGTH | 3.0 INCHES NOMINAL | | PROPRIETARY CHARACTERISTICS | NPAC | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.06 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.19 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | W/507548 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | ZINC OVERALL |
|
|