|
|
|
National Stock Number:
5315-01-595-1311
Federal Supply Class:
5315
National Item Identification Number:
015951311
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 6297003 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| ANGLE BETWEEN CENTERLINE OF HOLES | 45.0 DEGREES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 0.444 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.500 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.062 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.252 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END W/TWO DRILLED HOLES | | MATERIAL DOCUMENT AND CLASSIFICATION | ACDA 630 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | COPPER ALLOY 630 OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, LATCH | | PIN OVERALL DIAMETER | 0.748 INCHES NOMINAL | | PIN OVERALL LENGTH | 4.500 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.125 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SQUARE | | SPECIAL FEATURES | NEXT HIGHER ASSEMBLY AMMO HOIST, MK6 | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-495 FED SPEC 1ST TREATMENT RESPONSE AND MIL-L-3150 FED SPEC 2ND TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | OXIDE AND OIL OVERALL |
|
|