|
|
|
National Stock Number:
5315-01-582-3927
Federal Supply Class:
5315
National Item Identification Number:
015823927
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| MRP22261 | 0FW39 | BAE SYSTEMS TACTICAL VEHICLE SYSTEMS LP | | MRP22261-002 | 076M6 | AMZ ALABAMA INC. | | MRP22261-002 | 0FW39 | BAE SYSTEMS TACTICAL VEHICLE SYSTEMS LP |
|
Techincal Specification:
| HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 ASSN STD ALL MATERIAL RESPONSES OVERALL | | MATERIAL | STEEL COMP 1018 OVERALL OR STEEL COMP 1030 OVERALL OR STEEL COMP 1035 OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, STOP | | PIN HEAD DIAMETER | 32.0 MILLIMETERS NOMINAL | | PIN CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | PROPRIETARY CHARACTERISTICS | PACS | | SPECIAL FEATURES | HEAD OF PIN HAS A HOLE DRILLED AT A 45.0 DEGREE ANGLE THRU TOP TO SIDE OF PIN TO ACCOMODATE A LANYARD; HOLE NOMINAL DIAMETER IS 4.8 MILLIMETERS; CENTERLINE OF HOLE ON TOP OF HEAD IS LOCATED 5.6 MILLIMETERS MINIMUM FROM EDGE | | STYLE DESIGNATOR | STRAIGHT | | UNDER HEAD LENGTH | 74.0 MILLIMETERS NOMINAL | | DIAMETER | 25.4 MILLIMETERS NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 6.4 MILLIMETERS NOMINAL | | CHAMFER LENGTH | 1.5 MILLIMETERS MINIMUM AND 2.5 MILLIMETERS MAXIMUM | | FIRST HOLE DIAMETER | 5.7 MILLIMETERS MINIMUM AND 6.3 MILLIMETERS MAXIMUM | | HEAD STYLE | FLAT CHAMFER | | HEIGHT | 10.0 MILLIMETERS NOMINAL |
|
|