|
|
|
National Stock Number:
5315-01-515-6403
Federal Supply Class:
5315
National Item Identification Number:
015156403
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 29-11362-1 | 81205 | THE BOEING COMPANY | | 29-11362-1 | 82918 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.020 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED AND COUNTERBORED | | SECOND END TAPER LENGTH | 0.020 INCHES NOMINAL | | SECOND END COUNTERBORE DIAMETER | 0.064 INCHES NOMINAL | | SECOND END COUNTERBORE DEPTH | 0.100 INCHES NOMINAL | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | FIRST HOLE DIAMETER | 0.076 INCHES MINIMUM AND | | 0.086 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.150 INCHES NOMINAL | | SURFACE FINISH | 125.0 MICROINCHES OVERALL | | PIN OVERALL LENGTH | 1.090 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.3100 INCHES NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, FWD STRAP; SHAFT, LIFTER ASSEMBLY |
|
|