|
|
|
National Stock Number:
5315-01-507-8124
Federal Supply Class:
5315
National Item Identification Number:
015078124
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 290-508-01 | 0FC01 | SUNBELT DESIGN & DEVELOPMENT, INC |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.200 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 4.600 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.100 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL | STEEL COMP 303 OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, TOWBAR | | PIN OVERALL DIAMETER | 0.7500 INCHES NOMINAL | | PIN OVERALL LENGTH | 5.000 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.100 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.060 INCHES NOMINAL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM A967 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL |
|
|