|
|
|
National Stock Number:
5315-01-504-2832
Federal Supply Class:
5315
National Item Identification Number:
015042832
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 563-7286781-46 | 53711 | NAVAL SEA SYSTEMS COMMAND | | H684-1505-46 | 96169 | ELECTRIC BOAT CORPORATION |
|
Techincal Specification:
| MATERIAL | STEEL COMP 1018 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 1018 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHOULDER DIAMETER | 1.496 INCHES MINIMUM AND | | 1.498 INCHES MAXIMUM | | OVERALL LENGTH | 10.250 INCHES NOMINAL | | FIRST STEP DIAMETER | 1.246 INCHES MINIMUM AND | | 1.248 INCHES MAXIMUM | | SECOND STEP DIAMETER | 1.2504 INCHES MINIMUM AND | | 1.2508 INCHES MAXIMUM | | SECOND STEP LENGTH | 1.180 INCHES NOMINAL | | THIRD STEP DIAMETER | 0.750 INCHES NOMINAL | | THIRD STEP LENGTH | 0.620 INCHES NOMINAL | | SHOULDER LENGTH | 2.860 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.120 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER LENGTH | 0.055 INCHES NOMINAL | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END LOCATION | THREADED END | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 0.750 INCHES | | THREAD QUANTITY PER INCH | 16 | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.445 INCHES NOMINAL | | SPECIAL FEATURES | SHEAR SHAFT ASSEMBLED FROM P/N 563-7286781-46-1, ROUND BAR; 563-7286781-46-2, PLATE | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SHAFT, SHEAR |
|
|