5315-01-503-8386, PIN,STRAIGHT,HEADED

5975-01-503-8385 CONDUIT ASSEMBLY,NONMETALLIC,ELE

National Stock Number:
5315-01-503-8386

Federal Supply Class:
5315

National Item Identification Number:
015038386

Description:
PIN,STRAIGHT,HEADED

Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.

Manufacturer Information:

MS20392-4R47	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS20392-4R47	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
NASM20392-4R47	80204	AMERICAN NATIONAL STANDARDS INSTITUTE INCORPORATED
NASM5673	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

CHAMFER LENGTH	0.078 INCHES NOMINAL
DIAMETER	0.309 INCHES MINIMUM AND 0.311 INCHES MAXIMUM
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN	0.120 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
FIRST HOLE DIAMETER	0.096 INCHES MINIMUM AND 0.116 INCHES MAXIMUM
HEAD STYLE	PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
HEIGHT	0.062 INCHES NOMINAL
HOLE ARRANGEMENT STYLE	ONE END DRILLED
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCY	PIN, STRAIGHT, HEADED, DRILLED SHANK
PIN CHAMFER ANGLE	15.0 DEGREES NOMINAL
PIN HEAD DIAMETER	0.437 INCHES NOMINAL
MATERIAL	STEEL COMP XM-13 OVERALL
SHEAR STRENGTH	18270 DOUBLE POUND
STYLE DESIGNATOR	STRAIGHT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-C-320, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CHROMIUM OVERALL
UNDER HEAD LENGTH	1.709 INCHES MINIMUM AND 1.729 INCHES MAXIMUM

Click here to Register for Free 30-day Trial