|
|
|
National Stock Number:
5315-01-502-5679
Federal Supply Class:
5315
National Item Identification Number:
015025679
Description:
PIN,STRAIGHT,KNURLED
Detail:
A HEADLESS, CYLINDRICALLY-SHAPED, STRAIGHT, SOLID ITEM WITH OR WITHOUT A DRILLED HOLE(S). IT HAS A STRAIGHT OR DIAMOND KNURL. ITS LENGTH MUST NOT EXCEED 12 INCHES (304 MM). IT IS USED FOR ALIGNING OR TRANSFER OF TORQUE AND/OR THRUST, BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM.
|
Manufacturer Information:
| 1407M66P03 | 03350 | GENERAL ELECTRIC COMPANY DBA GE STRUCTURED SERVICES DIV GENERAL ELECTRIC STRUCTURED SERVICES LP |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 01 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | OXIDE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-13924 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 55.0 ROCKWELL C MINIMUM AND | | 59.0 ROCKWELL C MAXIMUM OVERALL | | STYLE DESIGNATOR | DIAMOND KNURLED | | OVERALL LENGTH | 2.250 INCHES NOMINAL | | DIAMETER | 0.4980 INCHES MINIMUM AND | | 0.4985 INCHES MAXIMUM | | KNURL OUTSIDE DIAMETER | 0.750 INCHES NOMINAL | | KNURL LENGTH | 1.000 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED W/THRU HOLE | | FIRST END TAPER LENGTH | 0.160 INCHES NOMINAL | | FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED W/THRU HOLE | | SECOND END TAPER LENGTH | 0.060 INCHES NOMINAL | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SPECIAL FEATURES | KNURLED HEAD FLAT EDGE 0.600 IN. DIA. |
|
|