|
|
|
National Stock Number:
5315-01-500-7281
Federal Supply Class:
5315
National Item Identification Number:
015007281
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 123-4556162 PART 13 | 43689 | HUNTINGTON INGALLS INC | | 123-5901612 PART 119 | 43689 | HUNTINGTON INGALLS INC |
|
Techincal Specification:
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 11.1562 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.1875 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST HOLE DIAMETER | 0.1406 INCHES NOMINAL | | FIRST END TAPER LENGTH | 0.0625 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-24059 MIL SPEC ALL MATERIAL RESPONSES OVERALL | | MATERIAL | | | PIN OVERALL LENGTH | 11.5312 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.8750 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.1406 INCHES NOMINAL |
|
|