|
|
|
National Stock Number:
5315-01-483-5805
Federal Supply Class:
5315
National Item Identification Number:
014835805
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 8520868 | 07187 | HONEYWELL INTERNATIONAL INC. |
|
Techincal Specification:
| FIRST END LOCATION | CHAMFERED END | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 30.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MAXIMUM OVERALL | | OVERALL LENGTH | 0.925 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 630 OVERALL | | NOMINAL THREAD SIZE | 0.112 INCHES | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, ALIGNMENT | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | SQUARE | | SHANK DIAMETER | 0.120 INCHES NOMINAL | | SPECIAL FEATURES | PIN HAS SHOULDER 0.050 DIA;UNDERCUT 0.010 MIN BEFORE EXTERNALLY THREADED END;SECOND END IS EXTERNALLY THREADED;END OF SHOULDER TO END OF PIN (THREADED END) IS 0.250 IN;SHOULDER IS HEX 0.188 BETWEEN THE FLATS | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 40 | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
|
|