|
|
|
National Stock Number:
5315-01-478-5788
Federal Supply Class:
5315
National Item Identification Number:
014785788
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| MS20392-2P17 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS20392-2P17 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | NASM5673 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| CHAMFER LENGTH | 0.045 INCHES NOMINAL | | DIAMETER | 0.188 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.038 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.060 INCHES MINIMUM AND 0.080 INCHES MAXIMUM | | HEAD STYLE | FLAT | | HEIGHT | 0.046 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, STRAIGHT HEAQDED, DRILLED SHANK | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.375 INCHES NOMINAL | | SPECIAL FEATURES | FLAT HEAD PIN, HEAD HEIGHT OF 0.046 INCHES, WITH PIN HOLE LOCATED 0.046 INCHES FROM CHAMFERED END; PIN HOLE DIAMETER OF 0.076 INCHES | | STYLE DESIGNATOR | STRAIGHT | | SURFACE TREATMENT | PASSIVATE OVERALL | | UNDER HEAD LENGTH | 0.531 INCHES NOMINAL |
|
|