|
|
|
National Stock Number:
5315-01-471-8095
Federal Supply Class:
5315
National Item Identification Number:
014718095
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 954078-1 | 1P175 | ENCORE INTERIORS, INC. |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.010 INCHES MINIMUM AND 0.070 INCHES MAXIMUM | | FIRST END LOCATION | THREADED END | | PART NAME ASSIGNED BY CONTROLLING AGENCY | PIN, ALIGNMENT | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766, COMP 304 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 304 OVERALL | | NOMINAL THREAD SIZE | 0.500 INCHES | | OVERALL LENGTH | 2.116 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND END TAPER ANGLE | 15.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.175 INCHES MINIMUM AND 0.185 INCHES MAXIMUM | | SECOND SHANK DIAMETER | 0.368 INCHES MINIMUM AND 0.372 INCHES MAXIMUM | | SECOND SHANK LENGTH | 1.500 INCHES NOMINAL | | SHANK DIAMETER | 0.500 INCHES MINIMUM AND 0.505 INCHES MAXIMUM | | SHANK LENGTH | 0.429 INCHES NOMINAL | | SHOULDER WIDTH ACROSS FLATS | 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM | | STYLE DESIGNATOR | UNDERCUT | | SPECIAL FEATURES | SHOULDER OF THE ITEM IS LOCATED 0.10 INCH BELOW THE GROOVE. | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.435 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 20 | | THREAD SERIES DESIGNATOR | UNF | | UNDERCUT DIAMETER | 0.415 INCHES NOMINAL | | UNDERCUT WIDTH | 0.001 INCHES MINIMUM AND 0.011 INCHES MAXIMUM |
|
|