|
|
|
National Stock Number:
5315-01-425-3063
Federal Supply Class:
5315
National Item Identification Number:
014253063
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 24-06463 | 1CC45 | MAC GREGOR USA INC | | 24-06463 | A236N | MACGREGOR SWEDEN AB - GOTEBORG | | 24-06463 | S8828 | MACGREGOR SWEDEN AB |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 66.0 MILLIMETERS NOMINAL | | ANGLE BETWEEN CENTERLINE OF HOLES | 10.0 DEGREES NOMINAL | | FIRST END STYLE | SQUARE | | FIRST HOLE DIAMETER | 6.0 MILLIMETERS NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END W/TWO DRILLED HOLES | | MATERIAL DOCUMENT AND CLASSIFICATION | SS 2321-03 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL OVERALL | | PIN OVERALL DIAMETER | 90.00 MILLIMETERS NOMINAL | | PIN OVERALL LENGTH | 125.0 MILLIMETERS NOMINAL | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | SECOND END TAPER LENGTH | 0.020 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND HOLE DIAMETER | 6.0 MILLIMETERS NOMINAL | | SURFACE FINISH | 1.6 MICROMETERS OVERALL |
|
|