|
|
|
National Stock Number:
5315-01-415-1894
Federal Supply Class:
5315
National Item Identification Number:
014151894
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 12385321-2 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A322 ASSN STD SINGLE MATERIAL RESPONSE OR | | ASTM A331 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | ZINC OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ASTM B633 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 28.0 ROCKWELL C MINIMUM AND | | 34.0 ROCKWELL C MAXIMUM OVERALL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.080 INCHES NOMINAL | | FIRST END TAPER ANGLE | 10.0 DEGREES MINIMUM AND | | 20.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.104 INCHES MINIMUM AND | | 0.119 INCHES MAXIMUM | | SECOND HOLE DIAMETER | 0.104 INCHES MINIMUM AND | | 0.119 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.250 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 3.500 INCHES NOMINAL | | PIN OVERALL LENGTH | 4.000 INCHES NOMINAL | | PIN OVERALL DIAMETER | 0.3730 INCHES NOMINAL | | SPECIFICATION/STANDARD DATA | 19207-12385321 GOVERNMENT SPECIFICATION |
|
|