|
|
|
National Stock Number:
5315-01-395-4671
Federal Supply Class:
5315
National Item Identification Number:
013954671
Description:
PIN,STRAIGHT,HEADLESS
Detail:
A headless, cylindrically-shaped item having a straight, smooth, solid body, with or without a drilled hole(s). It has an outside diameter equal to or less than its length. Its length must not exceed twelve inches (304 MM); for items whose length exceeds twelve inches (304 MM); see ROD, STRAIGHT, HEADLESS. It is used for aligning or transfer of torque and/or thrust, by fitting into corresponding holes of another item. See also PIN, STRAIGHT, THREADED.
|
Manufacturer Information:
| 1400106 | 07443 | LANDOLL CORPORATION DBA LANDOLL CORPORATION DREXEL DIVISION DIV DREXEL |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.250 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 3.250 INCHES NOMINAL | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST HOLE DIAMETER | 0.2040 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A311 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 1144 OVERALL | | PIN OVERALL DIAMETER | 0.9950 INCHES MINIMUM AND 0.9970 INCHES MAXIMUM | | PIN OVERALL LENGTH | 3.750 INCHES NOMINAL | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL | | SECOND HOLE DIAMETER | 0.2040 INCHES NOMINAL |
|
|