|
|
|
National Stock Number:
5315-01-390-1166
Federal Supply Class:
5315
National Item Identification Number:
013901166
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 856A4057P04 | 66464 | GENERAL ELECTRIC CO |
|
Techincal Specification:
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.190 INCHES NOMINAL | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.060 INCHES NOMINAL | | FIRST END LOCATION | OPPOSITE GROOVED END | | FIRST HOLE DIAMETER | 0.1247 INCHES MINIMUM AND 0.1250 INCHES MAXIMUM | | FIRST STEP LENGTH | 0.620 INCHES NOMINAL | | FIRST STEP DIAMETER | 0.373 INCHES MINIMUM AND 0.374 INCHES MAXIMUM | | HARDNESS RATING | | | HOLE ARRANGEMENT STYLE | ONE END DRILLED | | MATERIAL | | | NOMINAL THREAD SIZE | 0.312 INCHES | | SECOND END OUTER RADIUS | 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | OVAL | | SECOND STEP LENGTH | 1.690 INCHES NOMINAL | | SECOND STEP DIAMETER | 0.3125 INCHES NOMINAL | | STYLE DESIGNATOR | SHOULDER | | SPECIAL FEATURES | THREADS ARE ON THE SECOND STEP AND GROOVE IS LOCATED ON THE THIRD STEP | | THIRD STEP LENGTH | 0.440 INCHES NOMINAL | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THIRD STEP DIAMETER | 0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM | | THREAD LENGTH | 1.690 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
|
|