| CHAMFER LENGTH | 0.062 INCHES MINIMUM AND 0.094 INCHES MAXIMUM |
| DIAMETER | 0.745 INCHES MINIMUM AND 0.747 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.165 INCHES NOMINAL |
| FIRST HOLE DIAMETER | 0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM |
| HARDNESS RATING | |
| HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) |
| HEIGHT | 0.077 INCHES MINIMUM AND 0.109 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6300 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 4037 OR STEEL COMP 4130 OR STEEL COMP 8630 OVERALL |
| PIN CHAMFER ANGLE | 14.5 DEGREES MINIMUM AND 15.5 DEGREES MAXIMUM |
| PIN HEAD DIAMETER | 0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM |
| SHEAR STRENGTH | 66280 DOUBLE POUNDS PER SQUARE INCH |
| STYLE DESIGNATOR | STRAIGHT |
| SPECIAL FEATURES | SHANK END MAY HAVE EITHER A CHAMFER OR RADIUS AT THE OPTION OF THEVENDOR |
| SURFACE TREATMENT | ZINC AND CHROMATE OVERALL |
| UNDER HEAD LENGTH | 3.319 INCHES MINIMUM AND 3.339 INCHES MAXIMUM |