5315-01-359-2440, PIN,STRAIGHT,HEADED

National Stock Number:
5315-01-359-2440

Federal Supply Class:
5315

National Item Identification Number:
013592440

Description:
PIN,STRAIGHT,HEADED

Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.

Manufacturer Information:

MS20392-2R21	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS20392-2R21	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
NASM5673	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
NASM20392-2R21	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN	0.103 INCHES NOMINAL0.103 INCHES NOMINAL
CHAMFER LENGTH	0.046 INCHES NOMINAL0.046 INCHES NOMINAL
DIAMETER	0.184 INCHES MINIMUM AND 0.184 INCHES MINIMUM AND 0.186 INCHES MAXIMUM0.186 INCHES MAXIMUM
FIRST HOLE DIAMETER	0.066 INCHES MINIMUM AND 0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM0.086 INCHES MAXIMUM
HEAD STYLE	PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
HEIGHT	0.046 INCHES NOMINAL0.046 INCHES NOMINAL
HOLE ARRANGEMENT STYLE	ONE END DRILLEDONE END DRILLED
PIN HEAD DIAMETER	0.312 INCHES NOMINAL0.312 INCHES NOMINAL
PIN CHAMFER ANGLE	15.0 DEGREES NOMINAL15.0 DEGREES NOMINAL
SHEAR STRENGTH	6980 DOUBLE POUND6980 DOUBLE POUND
STYLE DESIGNATOR	STRAIGHTSTRAIGHT
UNDER HEAD LENGTH	0.772 INCHES MINIMUM AND 0.772 INCHES MINIMUM AND 0.792 INCHES MAXIMUM0.792 INCHES MAXIMUM

Click here to Register for Free 30-day Trial