|
|
|
National Stock Number:
5315-01-356-5139
Federal Supply Class:
5315
National Item Identification Number:
013565139
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| MS20392-2T55 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS20392-2T55 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | NASM5673 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| CHAMFER LENGTH | 0.046 INCHES NOMINAL0.046 INCHES NOMINAL | | DIAMETER | 0.184 INCHES MINIMUM AND 0.184 INCHES MINIMUM AND 0.186 INCHES MAXIMUM0.186 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 1.157 INCHES NOMINAL1.157 INCHES NOMINAL | | FIRST HOLE DIAMETER | 0.066 INCHES MINIMUM AND 0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM0.086 INCHES MAXIMUM | | HEAD STYLE | FLATFLAT | | HEIGHT | 0.046 INCHES NOMINAL0.046 INCHES NOMINAL | | HOLE ARRANGEMENT STYLE | ONE END DRILLEDONE END DRILLED | | PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL15.0 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.312 INCHES NOMINAL0.312 INCHES NOMINAL | | STYLE DESIGNATOR | STRAIGHTSTRAIGHT | | UNDER HEAD LENGTH | 1.881 INCHES MINIMUM AND 1.881 INCHES MINIMUM AND 1.901 INCHES MAXIMUM1.901 INCHES MAXIMUM |
|
|