5315-01-354-7797, PIN,STRAIGHT,HEADED

National Stock Number:
5315-01-354-7797

Federal Supply Class:
5315

National Item Identification Number:
013547797

Description:
PIN,STRAIGHT,HEADED

Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.

Manufacturer Information:

MS20392-7P43	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS20392-7P43	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
NASM5673	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
NASM20392-7P43	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

CHAMFER LENGTH	0.078 INCHES NOMINAL0.078 INCHES NOMINAL
DIAMETER	0.495 INCHES MINIMUM AND 0.495 INCHES MINIMUM AND 0.497 INCHES MAXIMUM0.497 INCHES MAXIMUM
DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN	0.165 INCHES NOMINAL0.165 INCHES NOMINAL
FIRST HOLE DIAMETER	0.096 INCHES MINIMUM AND 0.096 INCHES MINIMUM AND 0.116 INCHES MAXIMUM0.116 INCHES MAXIMUM
HEAD STYLE	PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)
HEIGHT	0.093 INCHES NOMINAL0.093 INCHES NOMINAL
HOLE ARRANGEMENT STYLE	ONE END DRILLEDONE END DRILLED
PIN CHAMFER ANGLE	15.0 DEGREES NOMINAL15.0 DEGREES NOMINAL
PIN HEAD DIAMETER	0.625 INCHES NOMINAL0.625 INCHES NOMINAL
SHEAR STRENGTH	49080 DOUBLE POUND49080 DOUBLE POUND
STYLE DESIGNATOR	STRAIGHTSTRAIGHT
UNDER HEAD LENGTH	0.078 INCHES NOMINAL0.078 INCHES NOMINAL

Click here to Register for Free 30-day Trial