|
|
|
National Stock Number:
5315-01-351-9243
Federal Supply Class:
5315
National Item Identification Number:
013519243
Description:
PIN,STRAIGHT,HEADED
Detail:
A headed, cylindrically-shaped item having a solid shank for fitting into corresponding holes, used for aligning or fastening. It may have welding projections. It also may contain holes drilled perpendicular to axial centerline. Excludes PIN, ECCENTRIC.
|
Manufacturer Information:
| MS20392-4R63 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS20392-4R63 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | NASM5673 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| CHAMFER LENGTH | 0.078 INCHES NOMINAL0.078 INCHES NOMINAL | | DIAMETER | 0.310 INCHES MINIMUM AND 0.310 INCHES MINIMUM AND 0.312 INCHES MAXIMUM0.312 INCHES MAXIMUM | | FIRST HOLE DIAMETER | 0.096 INCHES MINIMUM AND 0.096 INCHES MINIMUM AND 0.116 INCHES MAXIMUM0.116 INCHES MAXIMUM | | HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION)PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) | | HEIGHT | 0.062 INCHES MINIMUM0.062 INCHES MINIMUM | | HOLE ARRANGEMENT STYLE | DRILLED THRU CENTERDRILLED THRU CENTER | | PIN CHAMFER ANGLE | 0.150 DEGREES NOMINAL0.150 DEGREES NOMINAL | | PIN HEAD DIAMETER | 0.437 INCHES MINIMUM0.437 INCHES MINIMUM | | STYLE DESIGNATOR | STRAIGHTSTRAIGHT | | UNDER HEAD LENGTH | 1.959 INCHES MINIMUM AND 1.959 INCHES MINIMUM AND 1.979 INCHES MAXIMUM1.979 INCHES MAXIMUM |
|
|