|
|
|
National Stock Number:
5315-01-335-3492
Federal Supply Class:
5315
National Item Identification Number:
013353492
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 8002838 | 60225 | L3 TECHNOLOGIES, INC. |
|
Techincal Specification:
| MATERIAL | STEEL COMP 302 OR | | STEEL COMP 304 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A OR B FED SPEC ALL MATERIAL RESPONSES OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHOULDER DIAMETER | 0.330 INCHES MINIMUM AND | | 0.332 INCHES MAXIMUM | | OVERALL LENGTH | 1.510 INCHES MINIMUM AND | | 1.530 INCHES MAXIMUM | | FIRST STEP DIAMETER | 0.187 INCHES MINIMUM AND | | 0.190 INCHES MAXIMUM | | SECOND STEP DIAMETER | 0.235 INCHES MINIMUM AND | | 0.238 INCHES MAXIMUM | | SECOND STEP LENGTH | 0.510 INCHES MINIMUM AND | | 0.520 INCHES MAXIMUM | | THIRD STEP DIAMETER | 0.190 INCHES NOMINAL | | THIRD STEP LENGTH | 0.430 INCHES MINIMUM AND | | 0.480 INCHES MAXIMUM | | SHOULDER LENGTH | 0.270 INCHES MINIMUM AND | | 0.280 INCHES MAXIMUM | | FIRST END STYLE | CHAMFERED | | FIRST END TAPER LENGTH | 0.025 INCHES MINIMUM AND | | 0.045 INCHES MAXIMUM | | FIRST END TAPER ANGLE | 40.0 DEGREES MINIMUM AND | | 50.0 DEGREES MAXIMUM | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | RADIUS | | SECOND END CORNER RADIUS | 0.015 INCHES MINIMUM AND | | 0.030 INCHES MAXIMUM | | FIRST END LOCATION | THREADED END | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD SIZE | 0.190 INCHES | | THREAD CLASS | 2A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.430 INCHES MINIMUM AND | | 0.480 INCHES MAXIMUM | | SPECIAL FEATURES | THD END GROOVED TO 0.137 IN. MIN AND 0.143 IN. MAX DIA BY 0.010 IN. MIN AND 0.015 IN. MAX DIA |
|
|