|
|
|
National Stock Number:
5315-01-326-0632
Federal Supply Class:
5315
National Item Identification Number:
013260632
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| SW28670 | 5RQL2 | DRS ENVIRONMENTAL SYSTEMS INC | | SW28670 | 98255 | DRS SUSTAINMENT SYSTEMS INC |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4140 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | HARDNESS RATING | 58.0 ROCKWELL C NOMINAL OVERALL | | STYLE DESIGNATOR | SHOULDER | | SHANK LENGTH | 1.000 INCHES NOMINAL | | SHOULDER DIAMETER | 1.9935 INCHES MINIMUM AND | | 1.9940 INCHES MAXIMUM | | SHANK DIAMETER | 1.937 INCHES NOMINAL | | OVERALL LENGTH | 5.500 INCHES NOMINAL | | FIRST END STYLE | SQUARE | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED W/THRU HOLE | | SECOND END TAPER LENGTH | 0.190 INCHES NOMINAL | | SECOND END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END LOCATION | SHANK END | | THREAD SERIES DESIGNATOR | NPT | | NOMINAL THREAD SIZE | 0.125 INCHES | | THREAD DIRECTION | RIGHT-HAND | | HOLE ARRANGEMENT STYLE | BOTH END DRILLED | | FIRST HOLE DIAMETER | 0.250 INCHES NOMINAL | | SECOND HOLE DIAMETER | 0.406 INCHES NOMINAL | | DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 2.380 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.393 INCHES MINIMUM AND | | 2.453 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES SHOULDER OUTSIDE DIAMETER | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 98255 | | DESIGN CONTROL REFERENCE | SW28670 |
|
|