| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.400 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN HOLES | 2.720 INCHES MINIMUM AND 2.740 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.037 INCHES MINIMUM AND 0.042 INCHES MAXIMUM |
| FIRST STEP DIAMETER | 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| FIRST STEP LENGTH | 0.200 INCHES NOMINAL |
| HEAD STYLE | FLAT FILLISTER |
| HEIGHT | 0.200 INCHES NOMINAL |
| HOLE ARRANGEMENT STYLE | BOTH END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5726 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL OVERALL |
| PIN HEAD DIAMETER | 0.370 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| PROPRIETARY CHARACTERISTICS | PACS |
| NUMERIC DESIGNATION OF STEP ECCENTRIC TO HEAD | 1 |
| OFFSET DISTANCE BETWEEN GEOMETRIC CENTER OF HEAD AND CENTERLINE OF SHANK/SHOULDER | 0.057 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| OVERALL LENGTH | 2.880 INCHES MINIMUM AND 2.900 INCHES MAXIMUM |
| SECOND HOLE DIAMETER | 0.059 INCHES MINIMUM AND 0.064 INCHES MAXIMUM |
| SECOND STEP DIAMETER | 0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| SECOND STEP LENGTH | 2.680 INCHES MINIMUM AND 2.700 INCHES MAXIMUM |
| SPECIAL FEATURES | ONE END THREADED 0.250-28 UNJF-3ATHD PER MIL-S-8879/MAX TWO INCOMPLETE THREADS |
| STYLE DESIGNATOR | ECCENTRIC |
| SURFACE FINISH | 125.0 MICROINCHES OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |