| CHAMFER LENGTH | 0.042 INCHES MINIMUM AND 0.052 INCHES MAXIMUM |
| DIAMETER | 0.186 INCHES MINIMUM AND 0.187 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE OF HOLE TO END OF PIN | 0.066 INCHES MINIMUM AND 0.116 INCHES MAXIMUM |
| FIRST HOLE DIAMETER | 0.065 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD STYLE | PAN NO. 2 (R1 NOT REQUIRED IN ITEM DESCRIPTION) |
| HEIGHT | 0.042 INCHES MINIMUM AND 0.052 INCHES MAXIMUM |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-6758 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6370 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 8740 OR STEEL COMP 4130 OVERALL |
| PIN CHAMFER ANGLE | 15.0 DEGREES NOMINAL |
| PIN HEAD DIAMETER | 0.307 INCHES MINIMUM AND 0.317 INCHES MAXIMUM |
| STYLE DESIGNATOR | STRAIGHT |
| SURFACE FINISH | 32.0 MICROINCHES OUTSIDE DIAMETER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-T-10727,TYPE 2 0.0002-0.0004 THICK MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | TIN OVERALL |
| UNDER HEAD LENGTH | 1.204 INCHES MINIMUM AND 1.234 INCHES MAXIMUM |