|
|
|
National Stock Number:
5315-01-306-4940
Federal Supply Class:
5315
National Item Identification Number:
013064940
Description:
PIN,SHOULDER,HEADLESS
Detail:
A cylindrically-shaped headless item, having a shank at one or both ends. It is used for aligning, fastening, or transfer of torque and/or thrust by fitting into corresponding holes of another item. It may be threaded on one end.
|
Manufacturer Information:
| 11415C7-8-10 | 59563 | REID PRODUCTS INC. | | 3M943C7-8-10 | 06725 | SPS TECHNOLOGIES, LLC | | 3M943C7-8-10 | 56878 | SPS TECHNOLOGIES, LLC | | 3M943C7-8-10 | 56946 | G.S. PRECISION, INC. | | 3M943C7-8-10 | 73197 | HI-SHEAR CORPORATION | | 3M943C7-8-10 | 76301 | THE BOEING COMPANY | | D792685C8N10 | 17446 | HUCK INTERNATIONAL, INC | | AAP139C7-8-10 | 84256 | AVIBANK MFG., INC. | | VS3258C7-8-10 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | D792685C8N10 | 97928 | HUCK INTL INC | | 3M943C7-8-10 | K5673 | SPS TECHNOLOGIES LTD TJ BROOKS DIVISION | | 3M943C7-8-10 | L4528 | LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC |
|
Techincal Specification:
| FIRST END STYLE | CHAMFERED | | FIRST END TAPER ANGLE | 45.0 DEGREES NOMINAL | | FIRST END LOCATION | UNTHREADED END | | FIRST END TAPER LENGTH | 0.053 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND B FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-763,COND B FED SPEC 2ND MATERIAL RESPONSE OR MCA1R MMS265 CAGEC 76301 MFR REF 3RD MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP 302 OR STEEL COMP 304 OR STEEL COMP 303SE OVERALL | | NOMINAL THREAD SIZE | 0.437 INCHES | | OVERALL LENGTH | 2.563 INCHES NOMINAL | | SECOND END RELATIONSHIP WITH FIRST END | NOT IDENTICAL | | SECOND END STYLE | CHAMFERED | | SECOND END TAPER LENGTH | 0.668 INCHES MINIMUM AND 0.708 INCHES MAXIMUM | | SECOND END TIP RADIUS | 0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM | | SECOND SHANK DIAMETER | 0.4365 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM | | SECOND SHANK LENGTH | 1.125 INCHES NOMINAL | | SHANK DIAMETER | 0.3710 INCHES MINIMUM AND 0.3730 INCHES MAXIMUM | | SHANK LENGTH | 1.293 INCHES MINIMUM AND 1.333 INCHES MAXIMUM | | SHOULDER WIDTH ACROSS FLATS | 0.875 INCHES NOMINAL | | SPECIAL FEATURES | ROLLED RADIUS 0.040 IN. MIN. 0.050 IN. MAX. ON BOTH SHANKS ADJACENT TO SHOULDER | | STYLE DESIGNATOR | SHOULDER | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.625 INCHES NOMINAL | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
|
|